Filter
Top Products
69
4. Troubleshooting
Loading Paper in the Main Paper Tray
If there is no paper in the main paper
tray, the B indicator on the control
panel lights.
Use the following procedure to load
the paper.
Important
❒
When loading paper, be careful not
to pinch your fingers inside the
machine.
❒ Before loading paper, make sure
that the machine is not outputting
a copy or received document.
Note
❒ Regarding paper types and sizes
that can be used, see p.126 “Pa-
per”, Advanced Features.
❒ If you want to change the paper
size, see p.60 “Changing the Paper
Size Setting”, Advanced Features.
A
AA
A
Make sure that the main paper
tray is not being used.
B
BB
B
Pull out the main paper tray until
it stops.
C
CC
C
Push the metal plate down, and
then square the paper and load it
in the tray.
Important
❒ Do not stack paper over the lim-
it mark.
❒ If paper is left in the main paper
tray and you add paper, a mis-
feed might occur.
Note
❒ Shuffle the paper before setting
it in the tray.
D
DD
D
Push the main paper tray in until
it stops.
StellaF15_EN_Combine_F1_Pre_FM.book Page 69 Friday, August 27, 2004 6:22 PM