Filter
Top Products
Adjustment and Color Memory
142
4
Image Adjustment
You can change the following default settings for image adjustment:
Soft/Sharp You can adjust the edges of the image to make the image sharper or softer.
Note
❒
Default:
level 4
Contrast You can adjust the contrast between light parts and dark parts of the
image.
Note
❒
Default:
level 5
Background Density You can adjust the background density control.
Note
❒
Default:
level 5
❒
If copying a newspaper or an original with a dark background, ad-
just the background density to a lighter setting.
❒
If part of the original is marked with a highlighting pen, adjust the
background density to a darker setting. However, because the color
of a highlighting pen is difficult to duplicate, it might be copied in
different colors or some colors might not be copied.
Pastel You can make copies in pastel tones.
Note
❒
Default:
level 9 which yields a normal color copy
U.C.R. Adjustment You can adjust the black toner density to make the black parts clearer
in Full Color mode.
Note
❒
Default:
level 5
❒
Adjust this setting to a darker setting when you want to copy letter
parts clearly in black.
❒
Adjust this setting to a lighter setting when the original image is dark.
A.C.S. (Auto Color Se-
lection) Sensitivity
You can adjust the sensitivity when detecting whether the original has
color areas in Auto Color Select mode. When set to “B&W” values, the
machine will be more likely to detect originals as black originals. “Full
Color” values will cause the machine to be more likely to detect origi-
nals as color originals.
Note
❒
Default:
level 3
Text/Photo Sensitivi-
ty
You can adjust the sensitivity when detecting letter and photo parts of
an original in Text/Photo mode. If letter and photo parts of an original
are not differentiated correctly, adjust this setting.
Note
❒
Default:
level 5
Cat2-5_FM.book Page 142 Tuesday, February 20, 2001 9:27 AM