Filter
Top Products
Basic Procedure
39
2
B
Select the original type from the [Highlight Pen], [Inkjet Output], and [Map] key.
C
Place your originals, and then press the {
{{
{Start}
}}
} key.
Selecting the Copy Paper Size
Select a suitable size of copy paper based on the original size and the reproduc-
tion ratio.
Auto paper select
The machine automatically selects a suitable size of copy paper based on the
original size and the reproduction ratio.
Reference
Regarding functions that cannot be used together with this function, ⇒ P.121
“Combination Chart”.
Note
❒ Sizes of certain originals might not be detected depending on the original's
size and type. In this case, select the size manually.
❒ You can set thick or extra thick copy paper in tray 2 and 3. After setting it,
specify the weight of the paper. For details about how to specify the weight
of the paper, see “Tray Paper Type” ⇒ P.213 “System settings”.
A
Make sure that the [
Auto Paper Select
] key is selected.
Cat2-5_FM.book Page 39 Tuesday, February 20, 2001 9:27 AM