Filter
Top Products
User Tools
213
7
Setting You can Change with the User Tools (System Settings)
Reference
For details about how to access the user tools, ⇒ P.211 “Accessing the User
Tools”.
System settings
Menu Description
Function Priority You can specify the mode to be displayed immediately after the opera-
tion switch is turned on or System Reset Timer mode is turned on.
Note
❒
Default: Copier
Panel Tone A tone sounds when a key is pressed. This beeper can be turned on or
off.
Note
❒
Default: On
Ready / Tone Choose whether the machine beeps when it becomes ready for a copy
run after power up.
Note
❒
Default: On
❒
When the “Panel Tone” is set to Off, the beeper does not sound even
if the “Ready/Tone” is set to On.
Auto Timer The machine turns itself off automatically to conserve energy after your
job is finished, after the selected time. This function is called “Auto
Off”. The time can be set from 1 to 240 minutes.
Note
❒
Default: 90 minutes
Energy Saver Level The machine enters Low Power mode automatically a certain time after
your job is finished. You can set this time between 1 and 240 times.
Note
❒
Default: 15 minutes
Control Panel Off
Timer
The machine enters Energy Saver mode automatically after your job is
finished, after the selected time. The time can be set from 10 to 990 sec-
onds (in 10 seconds steps), or off. In Energy Saver mode, the panel dis-
play turns off.
Note
❒
Default: On (60 seconds)
Cat2-5_FM.book Page 213 Tuesday, February 20, 2001 9:27 AM