Filter
Top Products
Others
234
8
• When setting paper thinner than 64g/m
2
, 17 lb or translucent paper in the pa-
per trays or bypass trays, place it as shown in the figure below. The paper is
divided into the vertical and horizontal types depending on the texture flow
direction. If you place thin paper or translucent paper in the reverse direction,
a paper jam might occur. Since A3, B4, 11" × 17", and 8
1
/
2
" × 14" sizes of thin
paper are placed in the lengthwise direction in this machine, they must be of
the vertical type.
Paper Storage
• Paper should always be stored properly. Improperly stored paper might re-
sult in poor image reproduction, creased copies, and paper misfeeds. Gener-
ally, avoid curling and absorption of moisture.
• Avoid storing paper in humid areas. Under high temperature and high hu-
midity, or low temperature and low humidity conditions, store paper in a vi-
nyl bag.
• Do not store paper where it will be exposed to heat.
• Store on a flat surface.
• Use older stock first.
• Do not lay heavy objects on paper.
• Keep open reams of paper in the package, and store as you would unopened
paper.
Toner Storage
• Store in a cool, dark place.
• Never store toner where it will be exposed to heat.
• Do not lay heavy objects on toner container.
Texture
flow
Setting pa-
per in the
paper trays
Setting pa-
per in the
bypass tray
Vertical type
Horizontal type
GCYOSI1E
GCYOSI2E
Cat2-5_FM.book Page 234 Tuesday, February 20, 2001 9:27 AM