Filter
Top Products
A-4 Safety Information
Declaration of Conformity for Safety/EMI
The Printer, Finisher, High Capacity Feeder, and Container Stacker conform to the
directives and standards shown below. For further information or to request a copy of
the Declaration of Conformity, contact your Distributor.
70/92 ppm
1. EMC directive 89/336/EEC, 92/32/EEC
Emission:EN 55022 (Class A) / 1998
EN61000-3-2 (Class A) / 1995 / A1: 1998 / A2 : 1998
EN61000-3-3 / 1995
Immunity:EN55024 / 1998
IEC1000-4-2 / 1995/A1:1998
IEC1000-4-3 / 1995
IEC1000-4-4 / 1995
IEC1000-4-5 / 1995
IEC1000-4-6 / 1996
IEC1000-4-11 / 1994
2. Low Voltage Directive 73/23/EEC incl. Amendments:
EN60950:1992+A1:1993+A2:1993+A3:1995+A4:1997+A11:1997
EN60825-1:1994+A11:1996
3. CE Marking Directive 93/68/EEC
This equipment has been tested and found to comply with the limits for a class A
Information Technology Equipment in accordance with the European Standard
EN55022.
These limits are designed to provide reasonable protection against unacceptable
interference in either commercial or industrial environments. This equipment
generates, uses, and can radiate radio signals and if it is not installed and used in
accordance with the instructions detailed in this user’s guide, it may cause unacceptable
interference to radio communication installations and equipment. The operation of this
equipment in a residential area is likely to cause unacceptable interference in which
case you may be required to correct the source of the interference at your own expense.
In order to maintain compliance to the class A regulations, shielded cables must be used
with this equipment. Operation of this equipment without shielded cables is likely to
cause interference to radio and television receivers thereby degrading their reception.
Please be aware that changes and modifications made to the equipment without prior
approval of the manufacturer could negate your permission to operate the equipment.