Filter
Top Products
2-16 Operator Control Panel
Country Code
Select the appropriate country code used in international phone numbers. A
complete list is available in your telephone book or on the Internet. Country
Code is not necessarily related to language. The default setting is 1.
Energy Save Mode
Can be set to enable or disable.
Energy Save Time
When Energy Save Mode is enabled use this option to set the wait time (in
minutes) before the printer enters Energy Save Mode.
Password
Use to change the System password. The system password is used by your
System Administrator and provides access to the system parameters.
Emulation
Options are AutoSelect, PostScript and PCL.
Public R/W
Can be set to enable or disable. Enable allows read/write when SNMP
community name is Public.
Auto Online
Can be set to enable or disable. When disabled, if the offline button is pressed
the printer will remain in an offline status until the button is pressed again.
When enabled, the printer will automatically return to an online status within
3-5 minutes without pressing the button.
Auto Backup Time
Valid range is 0 - 23 (corresponding to the hour of the day). A system data
backup will be performed if the printer is on at the set time.
Best Fit Mode
Can be set to Standard or Compatible. Best Fit Mode works in conjunction
with the Best Fit setting.
Standard: Mode for PostScript Version 3015 command sets.
Compatible: Mode for PostScript Version 3011 command sets.
Output Cascade
Lower to Upper - The lower trays are given priority within each stacker.
Upper to Lower- The upper trays are given priority within each stacker.
Available only when the optional Container Stacker is attached. When two
Container Stackers are attached the setting applies to both. The priority
between Container Stackers is Container Stacker 1 first, then Container
Stacker 2.
Consumables
Use to replace the Developer Mix, Drum Unit, and Fuser Web
Language
Use to set the OCP language to English, Deutsch, Français, or Español.