Filter
Top Products
Operator Control Panel 2-13
Tray Adjust
The print position can be adjusted vertically and horizontally using the Tray
Adjust option. When printing in duplex mode, you can set different tray adjust
values for the front side and back side of the paper. See “Setting the Tray
Adjust Values” on page 3-16 for detailed information and instructions.
Ordered Sets
You can define an ordered set by specifying the number of pages in the set and
the paper source tray(s) that contain the ordered set pages. The printer will
support input tray cascading for ordered sets based on paper size and media
type. See “Ordered Sets” on page 3-18 for detailed information and
instructions.
Default Output
Use this option when the output tray is not designated by a host command.
Options include Upper Tray, Elevator Tray and Stacker 5, 6, 7 and 8, (if installed).
If a command from the host defines the output tray, the OCP setting is ignored.
Options
Wait Timeout
Defines the time period (in seconds) from reception of last data to the
reception of next data. If data is not received within the defined period, the job
is
terminated. A command from the host will override the OCP setting.
LPD Queuing
Can be set to enable or disable. The factory default is disabled. When enabled
the printer will accept and queue additional print jobs while a data transfer is
in process for another job.
Duplex Always
Can be set to enable or disable. When set to enable, the printer will always
print in duplex mode.
Auto Proof Sample
This function provides automatic proof sample printing instead of manually
pressing the Sample button on the OCP. The auto proof sample interval is
0 - 5,000 pages in 500 sheet increments (0, 500, 1,000, 1,500, ... 5,000). For
example, if the interval is set to “500”, the printer will automatically output a
proof sample to the sample tray every 500 sheets. If the interval is set to “0”,
the function is disabled.
PostScript
Print Errors
Can be set to enable or disable. When set to enable, the printer will print an
error page when a PostScript error occurs.