Filter
Top Products
4-28 Care and Maintenance
Cleaning the Toner Bottle Joint
1. Open the Toner Supply Cover.
2. Clean inside the Toner Supply Cover by wiping any visible toner away with a dry,
lint-free cloth.
3. Close the Toner Supply Cover.
Cleaning the Conveyance Belt Area
1. Open the Front Cover.
2. Turn the TH Handle to the RELEASE position.
3. Remove the Drum Unit. Refer to page 4-12 for instructions.
4. Using a dry, lint-free cloth, gently wipe the visible dust from the Paper Guide, TR
Guide, Drum Wrap Sensor, and the Lower Stay (C). .
NOTE:
When cleaning in the area surrounding the Drum Wrap Sensor, do not
touch the Drum Wrap Sensor or the hook of the Drum Wrap Sensor
Holder.
CAUTION!
Use care to avoid damaging the Plastic Grid.
Toner Supply Cover
Toner Hopper Unit
TR Guide
TH Handle
Lower Stay (C)
Paper Guide
Drum Wrap Sensor