Filter
Top Products
B-2 Printer Specifications
Specifications
Base Printer
Design and specifications are subject to change without notice.
Item Specification
Imaging Method Electro-Photography
Exposure System Semiconductor 2 laser beam (laser diode) scanning
Image Resolution 600 x 600 dots per inch (dpi)
Warm-up Time
Less than 240 seconds after deep sleep mode at
room ambient 68
o
F (20
o
C)
Continuous Print Speed in
Simplex mode from Tray 1
Up to 70 pages per minute (ppm) A4/Letter (LEF)
from Trays 1, 2, or 3. (70 ppm printer)
Up to 92 pages per minute (ppm) A4/Letter (LEF)
from Trays 1, 2, or 3. (92 ppm printer)
Printable Area Full size of the paper
Controller Egret 3R controller with PowerPC 750FX 800 MHz
Maximum Monthly Duty
Cycle
70 ppm: Up to 600K
92 ppm: Up to 800K
Nominal Voltage 200 to 240V
Nominal Frequency 50 Hz or 60 Hz
Power Consumption
70 ppm: 10A
92 ppm: 12A
Noise Level
65 dBA in operation
54 dBA in standby
Heat Output (BTU)
70 ppm: 6654 BTU/Hr.
92 ppm: 9444 BTU/Hr.
Operating Temperature and
Humidity
Temperature range: 50° to 90°F (10° to 32°C)
Humidity range: 20-80% RH (no condensation)
Dimensions 1000 x 650 x 665 mm (H x W x D)
Weight 374.7 lbs. (170 kg)
Memory Capacity 256 MB