Filter
Top Products
Care and Maintenance 4-9
Supplying the Developer Mix
Be sure to use only the developer mix that is specified for the printer. Using developer
that is not specified for the printer may degrade print quality or cause damage to the
printer. Refer to the table below to determine the correct developer mix for your printer.
1. Take the new developer bottle out of the box and shake it.
2. Remove the duct cap from the developer duct.
3. Place the new developer bottle onto the developer unit duct.
Printer Model
Developer Mix
Part Number Label Color
DDP 70 399071-900 White
DDP 70k, DDP70e,
and DDP92
337600-003 Green*
* Use developer mix Type-K (with a green
label) when the seal shown at right is
pasted on the duct of the developer unit.
Cap