Filter
Top Products
15
1. Getting Started
Guide to Components
1.
Exposure glass cover (optional) or
Auto Document Feeder (ADF) (op-
tional)
Lower the exposure glass cover over
originals placed on the exposure glass. If
you have the ADF, load a stack of origi-
nals here. They will be fed automatically,
one by one.
(The illustration shows the ADF.)
2.
Exposure glass
Place originals face down.
3.
Internal tray
Copied, printed paper or fax messages
are delivered here.
4.
Ventilation holes
Prevents overheating. Do not obstruct
the ventilation holes by placing anything
near it or leaning objects against it. If the
machine overheats, a fault might occur.
5.
Main power switch
If the machine does not operate after
turning on the operation switch, check
the main power switch is turned on. If it
is off, turn it on.
6.
Main power indicator
This indicator lights when the main pow-
er switch is turned on, and goes off when
the switch is turned off.
7.
On indicator
This indicator lights when the operation
switch is turned on, and goes off when
the switch is turned off.
8.
Operation switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).
RussianC3_AEgsg-F_FM.book Page 15 Monday, June 16, 2003 6:35 PM