Filter
Top Products
Basic Procedure for Scanning Files Using TWAIN Scanner
93
4
The following table shows the relationship between the original orientation
and the Scanner Control dialog box settings:
Placing an Original on the Exposure Glass
Placing an Original in the ADF/ARDF
Note
❒ Originals are normally rectangular ( ) or horizontally long ( ). However,
the table above uses squares to make original orientation easier to under-
stand. Even if the actual shape of the original is different, the combination
of original orientation and the orientation specified on the scanner driver
does not change.
❒ For details about the Scanner Control dialog box, see "Basic Procedure for
Scanning Files Using TWAIN Scanner".
❒ Depending on the settings, originals of different sizes are scanned differ-
ently.
Reference
p.91 “Basic Procedure for Scanning Files Using TWAIN Scanner”
Placing Originals TWAIN Scanner Control Dialog Box Key
top edge touches top left of exposure glass
This orientation is the TWAIN driver's stan-
dard setting. Place originals in this orienta-
tion normally
top edge touches rear of exposure glass
Original Orientation TWAIN Scanner Properties Dialog Box Key
top edge of original placed first
top edge touches rear of ADF/ARDF