Filter
Top Products
Specifying Destination
21
1
Searching for a Destination in the LDAP Server
By accessing an LDAP server, you can search for destinations and select them.
Important
❒ To use this function, you must connect an LDAP server to the network. In ad-
dition, under [System Settings], you must register the server and set [LDAP
Search] to [On]. For details, see General Settings Guide.
A Press {Search Destination}.
B Select [Search LDAP], and then press {OK}.
C Select [Select Server], and then press {OK}.
D Select the server, and then press {OK}.
If authentication is required to access the server, the authentication screen ap-
pears. Enter the user name and password correctly.
The Search LDAP screen reappears.
ALP003S