Filter
Top Products
Sending Scan Files by Scan to Folder
46
2
Basic Procedure for Sending by Scan to Folder
This section describes the basic operation for sending scan files by Scan to Folder.
Important
❒ This function is available only when Function Upgrade Option is installed.
A Make sure that no previous settings remain.
If a previous setting remains, press {Clear Modes}.
B If the Network Delivery Scanner or E-mail screen is displayed, press []
key to switch to the Scan to Folder screen.
C Place originals.
D Select a destination
You can specify multiple destinations.
For details, see "Specifying a Destination Folder".
E If necessary, press [Options] to specify the resolution and orientation of the
originals.
For details, see "Various Scan Settings".
F Press {Start}.
Scanning starts.
You must press {q} to send scan files that are scanned from the exposure glass.
Scan files that are scanned from the ADF are sent immediately.
G If you still have originals to send, place them on the machine, and then
press {Start}.
Repeat this step until all originals are scanned.