Filter
Top Products
Specifying Send Options
97
5
To correctly display the top/bottom orientation of the scanned original on a
client computer, the placement of the original and the settings made on the
control panel must match.
The following table shows the relationship between the original orientation
and the control panel settings.
Placing an Original on the Exposure Glass
Placing an Original in the ADF/ARDF
Note
❒ Originals are normally rectangular ( ) or horizontally long ( ). However,
the table above uses squares to make original orientation easier to under-
stand. Even if the actual shape of the original is different, the combination
of original orientation and the orientation specified on the scanner driver
does not change.
Original orientation Control Panel Key
top edge touches top left corner of exposure
glass
top edge touches rear of exposure glass
Original orientation Control Panel Key
top edge placed first
top edge touches rear of ADF/ARDF