Filter
Top Products
Message Causes Solutions
Unsupported USB
Hub Please Remove
The Scan to USB function failed
because a USB device other
than a USB flash disk or a USB
flash disk with an unsupported
file system was used.
Use a USB flash disk that is compatible
with the Scan to USB function.
USB Disconnected
Press Clear key
The Scan to USB function failed
because the USB flash disk was
removed before the operation
could be completed.
Check that the USB flash disk is securely
inserted in the machine. Do not pull out the
USB flash disk until "Ready" appears on
the display.
USB Memory
Overflow Press Clear
key
The Scan to USB function failed
because there was not enough
memory on the USB flash disk.
Use a USB flash disk with enough memory.
Write Protect Press
Clear key
The Scan to USB function failed
because the machine could not
access the USB flash disk
properly.
Use a USB flash disk that is not password-
or write-protected.
9. Troubleshooting
408