Filter
Top Products
25
1. Preparing the Machine
Making the Settings for Using Dr.PICZA3
You use the included Dr. PICZA3 program to make the settings that let you perform scanning with the machine.
1
Start Dr.PICZA3.
From the [Start] menu, choose [All programs (or Programs)], then [Roland Dr.PICZA3], then [Dr.PICZA3].
2
Go to the [File] menu and click [Preferences].
3
Make the setting for the communication port and the unit of measurement to use with Dr. PICZA3.
This completes all the preparations you need to make to perform scanning using the machine.
1-3 Installing and Setting Up the Software
Choose the number of the port
labeled "(Roland LPX-1200 USB
Port)."
Set [Units] to either [mm] or [inch].
Click this after you complete
making the setting.