Filter
Top Products
1
To Ensure Safe Use
About the Power Supply
Be sure to read this chapter before use. It contains important notes for using this machine safely. Be sure to
observe the notes when using the machine.
This manual uses the following notation for important notes on using the machine safely.
Operation and Handling
Do not disassemble, repair, or modify.
Doing so may lead to fire or abnormal op-
eration resulting in injury.
Do not use with any power supply other
than the dedicated AC adapter.
Use with any other power supply may lead
to fire or electrocution.
Do not use with any electrical power sup-
ply that does not meet the ratings dis-
played on the AC adapter.
Use with any other power supply may lead
to fire or electrocution.
Use only with the power cord included
with this product.
Use with other than the included power cord
may lead to fire or electrocution.
Do not use while in an abnormal state
(i.e., emitting smoke, burning odor, un-
usual noise, or the like).
Doing so may result in fire or electrocution.
Immediately unplug the power-cord plug
from the electrical outlet, and contact your
authorized Roland DG Corp. dealer or ser-
vice center.
Used for instructions intended to alert the user to the risk of death or
severe injury should the unit be used improperly.
About and Notices
Used for instructions intended to alert the user to the risk of injury or
material damage should the unit be used improperly.
* Material damage refers to damage or other adverse effects caused
with respect to the home and all its furnishings, as well to domestic
animals or pets.
About the Symbols
The symbol alerts the user to items that must never be carried out (are forbidden).
The specific thing that must not be done is indicated by the design contained within the
circle. The symbol at left means the unit must never be disassembled.
The symbol alerts the user to things that must be carried out. The specific thing that
must be done is indicated by the design contained within the circle. The symbol at left
means the power-cord plug must be unplugged from the outlet.