Filter
Top Products
56
5. Appendix
5-1 Specifications
Machine Specifications
System Requirements for the Software
System Requirements for USB Connection
• Whether a USB connection is possible depends on the specifications of the computer. To determine whether the
computer you're using is capable of correct USB operation, check with the manufacturer of the computer.
• Use a shielded USB cable having a length of three meters or less. Do not use a USB hub or the like.
Table size
Maximum scanning area
Scanning pitch
Repeat accuracy
Maximum table load weight
Laser
Sensor
Scanning method
Operating speed
Interface
Power supply
Power consumption
Dimensions
Weight
Packed dimensions
Packed weight
Environment
Included items
LPX-1200
Diameter 130 mm (10 in.)
Plane scanning: Width 130 mm (5 in.), height 203.2 mm (8 in.)
Rotary scanning: Diameter 130 mm (5 in.), height 203.2 mm (8 in.)
Plane scanning: width direction 0.1 to 130 mm, height direction 0.1 to 203.2 mm
Rotary scanning: circumference 0.18 to 3.6 degrees, height direction 0.1 to 203.2 mm
±0.05mm (This figure reflects standard scanning conditions established by Roland DG.)
5 kg
Wavelength: 645 to 660 nm
Maximum output: less than 0.39 µW
(maximum output of the laser light emitted inside housing is 0.1 mW)
Noncontact laser sensor
Spot-beam triangulation
Table rotation speed: 9 rpm, head rotation speed: 4.48 rpm, maximum head movement speed: 7.58
mm/sec.
USB interface (compliant with Universal Serial Bus Specification Revision 1.1)
Dedicated AC adapter
Input: AC 100 to 240 V ±10% 50/60 Hz 1.0A
Output: DC 19 V, 2.1 A
Approx. 20W (including AC adapter)
443 [W] x 396 [D] x 609 [H] mm (17-7/16 [W] x 15- 9/16 [D] x 24 [H] in.)
35 kg
620 [W] x 550 [D] x 810 [H] mm (24-1/2 [W] x 21- 5/8 [D] x 31-7/8 [H] in.)
43 kg
Temperature: 10 to 40ºC (50 to 104ºF) (25ºC [77ºF] or more recommended)
Humidity: 35 to 80% (no condensation)
AC adapter, power cord, CD-ROM, clay, user's manual, Roland Pixform Pro
Operating system
CPU
Memory
Free hard-disk space
required for installation
Windows XP/2000/Me/98
Pentium II or higher
128 MB or more
Dr.PICZA3: 20 MB or more
3D Editor: 10 MB or more
Operating system
Computer
Windows XP/2000/Me/98 (Windows 95 and Windows NT4.0 are not supported.)
1) Computers preinstalled with Windows 98/Me/2000/XP at the time of purchase
(This includes such computers later upgraded to Windows Me/2000/XP.)
2) Computers on which USB operation is assured by the manufacturer of computers