Filter
Top Products
33
2. Creating 3D Data
5
While viewing the preview, make the following settings, then start scanning.
Scanning pitch
Using a fine setting can reproduce details more accurately, but the amount of memory required increases, and scanning takes
longer time.
Scanning area
Specify the minimum area that allows the entire object to be scanned, thereby speeding up scanning time.
(The following settings are only for plane scanning.)
The number of scanning surfaces
You can specify from one to as many as six surfaces. It's a good idea to decide on the number of surfaces to match the shape
of the object.
Scanning angle
Specify the incident angle of the laser for each surface. It may be a good idea to set the preview to Top View.
6
When scanning ends, the results of scanning appear.
☞ Go to "2-3 Performing Scanning" and see "Checking the Scanning Results."
Setting screen for scanning (plane scan)
This sets the number of
scanning surfaces (plane
scan only).
This changes to the surface
whose scanning angle you
want to set (plane scan only).
This sets the scanning pitch.
During rotary scan, these make the
settings for "Height" and "Circum-
ference."
This changes the orientation
and perspective for the preview.
These let you switch between Top
View and Front, and expand or
reduce the view.
This sets the scanning area.
During rotary scan, these set the
"Height Direction" and "Circum-
ferential" pitch values.
This sets the scanning angle
(plane scan only).
2-3 Performing Scanning
This displays the amount of
memory that scanning requires.
Clicking the button displays the
estimated scanning time.
Clicking this button
starts scanning.