Filter
Top Products
11
Catalyst™ Software Suite
The following section provides an explanation of each ATI tab available after installing the
Catalyst™ Software Suite.
ATI Displays Tab
The ATI Displays tab provides the multi monitor features. Here you can enable/disable
display devices and swap the assignment of
Primary
and
Secondary
displays.
Features presented in the following pages may not be supported in all operating systems and/or may appear
differently.
Enabling/Disabling Secondary Displays
1
Access the Windows
®
Control Panel
. Double-click
Display
.
2
Click on the
Settings
tab and then the
Advanced...
button.
3
Click on the
ATI Displays
tab.
4
Click the enable/disable button for the display device you want to enable/disable.
5
Click
OK
or
Apply
to save the changes.
Enabling Extended Desktop Mode
1
Access the Windows
®
Control Panel
. Double-click
Display
.
2
Click on the
Settings
tab.
3
Click the monitor icon for the display onto which you want to extend your desktop.
4
Click
Yes
to enable the selected display.
5
Checkmark the
Extend my Windows desktop onto this monitor
check box (Windows
®
may
automatically place it there).
6
Click
OK
or
Apply
to save the changes.
Dynamic Display Reassignment
You can change the assignment of your
Primary
and
Secondary
display on the fly, without
rebooting. However, before you can change the assignment of the
Primary
display, at least
one
Secondary
display must be enabled, and Extended Desktop mode must be enabled.
To enable a Secondary display, refer to the section Enabling/Disabling Secondary Displays.
To enable Extended Desktop Mode, refer to the section Enabling Extended Desktop Mode.
1
Access the Windows
® Control Panel
. Double-click
Display
.
2
Click on the
Settings
tab and then the
Advanced...
button.