Filter
Top Products
3
Installing Your RADEON™
Now that you have prepared your computer, you are ready to install your RADEON™
graphics accelerator card.
To install your graphics accelerator card
1.
Power off the computer and monitor
, then
disconnect the display cable
from
the back of your computer.
2.
Remove the computer cove
r. If necessary, consult your computer’s manual for
help in removing the cover.
3.
If you intend to run multiple displays with Windows
98 or Windows
Me (see
page 9), then proceed to step 4.
Otherwise, remove any existing graphics card
from your computer.
Or,
if your computer has any
on-board graphics capabilit
y, you may need to
disable it
on
Remember to
discharge your
body’s static
electricity by
touching the metal
surface of the
computer chassis.
If the old graphics
card sticks, rock it
gently from end to
end.
Remember to save
the screw.