Filter
Top Products
Wireless Router RNX-GX4 User’s Manual
27
When complete entering, please click “Save Settings” to save and complete
your basic setup.
3.4.3 Static user in Internet Setup
When selecting “Static user” as your internet connection method, you will need
to enter WAN IP address, Subnet Mask, Default Gateway, Primary DNS, and
Secondary DNS provided by your Internet Service Provider.
PPPoE provides three connection methods:
Connect to Internet automatically (Default): This is suitable for DSL connecting method charged
by month; once the Router’s power-on, your internet connection will be establish automatically.
Auto disconnect when idle within your desired time limits: This is suitable for DSL connecting
method charged by the time you connect online. Your router will not be connect automatically,
however, once your Router detect you are visiting the internet, it will automatically connect your
service and it will automatically disconnect internet with the time you set (5~30 minutes), if no
internet visiting.
Connect to Internet manually: This is suggested to be use by Network Administrator to provide
internet when needed. Router will not connect internet automatically but manually connect thought
visiting the web management page.