Filter
Top Products
Wireless Router RNX-GX4 User’s Manual
30
You can select whether to broadcast your SSID. The default setting is
“Enable”.
z Enable: All Wireless Adapter will be able to see your SSID within
your Wireless Router’s broadcasting range.
z Disable: You will need to manually setup the connection between
your wireless adapter and SSID.
h Channel:
You can select one channel from auto or manually from 1 to 11, which
provides a choice of avoiding interference.
After complete, please click “Save Setting”. Your Basic Wireless setting will
be complete.
3.5.1.2 Router’s Wireless Security Setup
Please select “Primary AP Setup” under “Wireless Management”, then click
select “Security” tab. This “Security” Tab allows you to encrypt your wireless
communication also to protect your wireless network from unauthorized user
access.
Security Mode provides you with five encryption selections, “None”, “WEP”,
“WPA SOHO USER”, “WPA2 SOHO USER” and “WPA & WPA2 SOHO USER”.
h None:
When selecting “None”, you choose not to set any encryption on your
wireless network. Your wireless network will not be protected. You can
use this selection when setting for a public wireless network.
Wireless Network Security: Upon completing the basic wireless network setting. Please do
remember to change the default security setting from “None” to the Security mode that you desire
to prevent your wireless network from unauthorized access.