Filter
Top Products
Wireless Router RNX-GX4 User’s Manual
48
3.12.1 Manually Restore Default
You can also manually reset RNX-GX4. In order to do this, you will need to follow
the below steps:
1. Unplug the power of RNX-GX4
2. Using a sharp item to press on the “Default” button at the back of the
RNX-GX4.
3. Plug the power back to the “PWR” hole, while still pressing the “Default”
button.
4. Release the “Default” button when you see the “SYS” LED (red LED)
start flashing.
5. After releasing the Default button, please wait for 1 min for the reset to
take effect.
Password Setting: RNX-GX4’s Username is default as “admin”. We strongly recommend you when first
login to the Web management page, please change the Password right away. If you lost your password,
you will need to restore back to Default to access back to RNX-GX4.
Firmware Upgrade: It will take around 1 min to upgrade the router, please do not disconnect RNX-GX4
from the power to avoid possible damage while updating firmware.
Restore Default: When restore back to default, all of your RNX-GX4’s previous setting will be lost.