Filter
Top Products
46 Administering RADIUS Clients September 2005
Adding a RADIUS Client
To add a RADIUS client:
1 Open the RADIUS Clients panel.
2 Click the
Add button.
The Add RADIUS Client window (Figure 12) opens.
Figure 12 Add RADIUS Client Window
3 Enter the name of the RADIUS client in the Name field.
Although you can assign any name to a RADIUS client entry, you should use
the device's hostname to avoid confusion.
You can create a special RADIUS client entry called
<ANY> by clicking the
Any RADIUS Client checkbox (Figure 13). The <ANY> RADIUS client
enables RSA RADIUS Server to accept requests from any RAS, as long as
the shared secret is correct.
Figure 13 Creating an <ANY> RADIUS Client
Note that the IP Address field for an <ANY> RADIUS client cannot be
edited.
<ANY> implies that the server accepts requests from any IP address,
provided that the shared secret is correct.