Filter
Top Products
Controls and Functions
10 Runco CL-810 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
1. LIGHT
Press to illuminate the buttons.
2. ON / OFF
Use these buttons to turn the projector on or off.
3. Source Selection Buttons:
VID
Press to select Composite video input as the source.
S-VID (S-Video)
Press to select the S-Video input as the source.
COMP1 (SD Component)
Press to select Component 1 (SD 480i/576i) video input as the source.
COMP2 (HD Component)
Press to select Component 2 (HD 480p/576p/720p/1080i) video input as the source.
RGBHD
Press to select the Component 2 RGB input.
HDMI
Press to select the HDMI input.
4. INFO
Displays active source and aspect ratio information.
Cursor Keys ( , , , )
Use these buttons to select items or settings, adjust settings or switch display
patterns.
RVR (Reflectance Volume Regulation)
Adjusts the lens aperture (iris) setting according to the ambient light level in the
viewing area.
EXIT
Press to save menu item setting(s), exit the current menu and return to the previous
one.
ENTER
Press to select a highlighted menu item or confirm a changed setting.
MENU
Press this button to show or hide the on-screen display (OSD) controls.