Runco CL-810 ULTRA Projector User Manual


 
Installation
Runco CL-810 Series Owner’s Operating Manual 27
PRE
L
IMINAR
Y
Connecting Source
Components to the
CL-810
If your installation does not include an SDC-1: Connect your video sources to the
CL-810 as shown and described in the sections that follow.
HDMI/DVI Connections: See Figure 3-10. With an HDMI source, use the included
HDMI-to-HDMI cable; with a DVI source, use the included DVI-to-HDMI cable.
Figure 3-10. HDMI/DVI Source Connections
RGB Connections: Connect your personal computer or other RGB source (DVD player
or HD set top box) to the COMP 2/RGB input; see
Figure 3-11. You can use the included
DB15HD-to-5 x BNC cable if your RGB source has a 15-pin, VGA-type connector.
Figure 3-11. RGB Connections
Use the HDMI input whenever possible. This ensures the highest
video quality because the signal is carried in the digital domain
throughout the entire signal path, from source component output
into the projector.
Tip
S-VID /
S-VID
HDMI or DVI Source
(DVD Player or HD Set Top Box)
S-VID /
S-VID
S-VID /
S-VID
DVD Player or
HD Set Top Box
Green Blue Red Horiz Vert
Green Blue Red Horiz Vert
Personal Computer