![](http://pdfasset.owneriq.net/9/73/97361e31-bcbd-48a6-9c1d-000c69c78016/97361e31-bcbd-48a6-9c1d-000c69c78016-bg24.png)
Installation
24 Runco CL-810 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
Install Lens Motor Position the AutoScope Lens Motor (item #5) as shown in Figure 3-8. Line up the eight
mounting holes on the lens motor housing with those on the Lens Motor Mounting Plate.
Secure the motor to the projector with the eight, 1/4-20 x 1/2” Phillips screws (item #6)
provided for this purpose.
Figure 3-8. AutoScope Lens Motor Installation
DO NOT OVER-TIGHTEN THE SCREWS.
Caution
➤