Filter
Top Products
Specifications
88 Runco LS-HB Installation/Operation Manual
P
RELI
M
INARY
Performance
Microdisplay: Texas Instruments DLP® 1080p DMD
Native Resolution: Full HD, 1920 x 1080 (2,073,600 pixels)
Aspect Ratios: Native (Pixel-to-Pixel), 16:9, Letterbox, 4:3, 4:3 Narrow,
Letterbox (Anamorphic lens compatible)
Throw Ratios: Refer to Table 3-3
Vertical Lens Shift Range
(Ceiling Mount):
Down = 25% to 60% of screen height below lens center
(50% to 120% of one half of the screen height)
Light Output (SatCo = High): 2,700 ANSI lumens (average) calibrated at D65
Sequential Contrast (SatCo =
High):
1,800:1 typical
Cooling Performance: High efficiency adaptive voltage side-to-side cooling
with low system acoustic noise level and low light
pollution cabinet
Projection Modes: Front, Rear, Ceiling (front/rear)
Lamp: User replaceable 230W HPM; 2,000 hour lifetime
(typical)
Video Processing: Runco advanced ViVix processing with 10 bit
independent dual channel image processing, true 1080i
deinterlacing, MPEG artifact reduction (block and
mosquito noise), latest motion adaptive processing, 3D
noise reduction, detail enhancement, rich color
processing and noise reduction, less than one frame
latency
Calibration: Full RGB gain/offset control (White Balance), Gamma,
Contrast, Brightness
Table 7-1. LS-HB Specifications (continued)