Runco LS-HB Projector User Manual


 
Operation
Runco LS-HB Installation/Operation Manual 63
PRE
L
IMINAR
Y
Source Enable: To enable or disable selection of a source, choose Source Enable from
the System menu and press ENTER. This displays the Source Enable sub-menu, shown
in Figure 4-12.
Figure 4-12. Source Enable Sub-Menu
HDMI1/HDMI2: Enables or disables the HDMI 1 and HDMI 2 sources.
•RGB: Enables or disables the RGB source.
•Comp1: Enables or disables the Component 1 source.
•Video: Enables or disables the Composite video source.
•S-Video: Enables or disables the S-Video source.
•SCART: Enables or disables the SCART RGBS source.
If either Component 1 or Video is enabled, SCART must be disabled.
If SCART is enabled, both Component 1 and Video must be disabled.
Note
Note