![](http://pdfasset.owneriq.net/f/66/f66d27fd-2af1-4f70-ab15-2b7bde04f3de/f66d27fd-2af1-4f70-ab15-2b7bde04f3de-bg2d.png)
Installation
Runco LS-HB Installation/Operation Manual 29
PRE
L
IMINAR
Y
3.6
Connections to the
LS-HB
Proceed as follows to connect the LS-HB to your video sources, external controller(s) – if
present – and AC power.
When connecting your equipment:
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
Connector Panel AccessUsing a flat-blade screwdriver, loosen the two
screws holding the rear compartment cover
in place.
Then, remove the rear compartment cover by
tilting it upward.