Filter
Top Products
! 3 - Installing the SAGEM F@st
TM
1000 modem
User Guide - N56815740110
Page 3-28
No reproduction or communication without the written consent of SAGEM SA
3.4 Installing for Windows Millennium
For Windows Millennium, installation of the SAGEM F@st
TM
1000 modem is carried out according to
the following process:
! Installing the modem drivers,
! Configuring a new dial-up connection.
3.4.1 Installing the modem
! Switch off the modem if it is powered by unplugging the power supply cable either on the modem
side (connector marked PWR), or on the mains side.
! Switch on the PC and wait for the complete startup of Windows ME.
! Insert the installation CD-ROM; the welcome page appears after a few seconds.
If this screen does not appear automatically proceed as follows:
From the Start menu select Run then enter <Drive letter for the CD-ROM>:\English\Setup.exe.
! Select Modem setup on this page.
The following screen appears:
The install program copies the files necessary for the installation onto the PC's hard drive.
! Make the modem connections when the application prompts you.
! Connect the modem to the PC with the USB cable, and to the telephone line (ADSL) with the line
cable.
! Connect the power supply cable to the modem (connector marked PWR), then connect the mains
adapter to power up the SAGEM F@st
TM
1000.
After connecting the modem, the PC installs the drivers ADSLBOOT, VVBusUSB and VVBATM.