Filter
Top Products
! 3 - Installing the SAGEM F@st
TM
1000 modem
User Guide - N56815740110
Page 3-36
No reproduction or communication without the written consent of SAGEM SA
3.5 Installing for Windows 98 First Edition
For Windows 98 First Edition, installation of the SAGEM F@st
TM
1000 modem is carried out according
to the following process:
! Installing the modem drivers,
! Configuring a new dial-up connection.
3.5.1 Installing the modem
! Switch off the modem if it is powered by unplugging the power supply cable either on the modem
side (connector marked PWR), or on the mains side.
! Switch on the PC and wait for the complete start-up of Windows 98FE.
! Insert the installation CD-ROM; the welcome page appears after a few seconds.
If this screen does not appear automatically proceed as follows:
From the Start menu select Run then enter <Drive letter for the CD-ROM>:\English\Setup.exe.
! Select Modem setup on the welcome page.
The install program checks the software configuration of Windows.
! Insert the Windows 98FE CD-ROM when Windows asks for it:
! Click on OK to continue.
When all Windows components are installed on your PC, the following screen appears: