1 - SAGEM F@st™ 1000 modem overview
User Guide - N56815740110
No reproduction or communication without the written consent of SAGEM SA
Page 1-3
1.3 Installation instructions
1.3.1 Environment
! The SAGEM F@st™ 1000 must be installed and used inside a building.
! Room temperature must not exceed 45°C.
! The SAGEM F@st™ 1000 can be placed on a desktop or mounted vertically on a wall.
! The SAGEM F@st™ 1000 must not be exposed to strong sunlight or strong sources of heat.
! The SAGEM F@st™ 1000 must not be placed in an environment subject to significant steam
condensation.
! The SAGEM F@st™ 1000 must not be exposed to splashes of water.
! The SAGEM F@st™ 1000 unit must not be covered.
! The SAGEM F@st™ 1000's mains adapter unit must not be covered.
OBSERVE AND RETAIN THESE INSTRUCTIONS
1.3.2 Power source
! The SAGEM F@st™ 1000 modem is supplied with its own mains adapter. It must not be
used with any other adapter.
! This Class II adapter requires no earth. The connection to the mains system must be
compliant with the information conveyed on its label.
! Use a readily accessible mains outlet near to the modem. The power cable is 2 m long.
! Arrange the power cable in such a way as to avoid any accidental disconnection of the
power supply to the modem.