Filter
Top Products
Using the Control Panel
3.
7
PCL Menu
This menu sets the PCL emulation configuration. You can set
the font type, symbol type, lines per page, and point size.
(*: the default setting)
Maintenance
This item allows you to maintain the toner
cartridges and other consumables.
•
Check Others
: This item allows you to view
the usage status of consumables.
Items you can check:
- Fuser
- MP Pickroll
,
Tray1 Pickroll
,
Tray2 Pick
roll
: These items are only for service
technicians.
•
Alarm Shortage
: This item determines how
the printer behaves when consumable items
run low.
Off
: The printer does not display a warning
message.
On
: The printer displays a warning message.
Item Explanation
Item Explanation
Typeface
You can select the standard font to be used
in PCL emulation.
• PCL1~PCL7’s interval between letters is
fixed, and PCL8~PCL44’s interval is
proportional to the font type and point size.
You can adjust the font size of PCL1~PCL7
using the
Pitch
item, and PCL8~PCL44 can
do using
Point Size
item.
PCL45~PCL54’s interval and point size are
fixed.
Symbol
This item selects the symbol to be used in
PCL emulation. The symbol is the group of
numbers, marks, and special signs being
used when printing letters.
Values: PCL1 ~ PCL54
Values: PC8 ~ PC1004
PostScript Menu
This menu provides you with the Print PS Error
menu
item.
(*: the default setting)
Lines
This item allows you to set vertical spacing
from 5 to 128 lines for the default paper
size. The default value of Lines may differ
according to the paper size and printing
orientation.
Pitch
When you select from PCL1 to PCL7 from
the
Typeface
menu, you can determine the
font size by setting the number of
characters that will print in one horizontal
inch of type. The default value, 10, is the
recommended size.
Point Size
When you select from PCL8 to PCL44 from
the
Typeface
menu, you can determine the
font size by setting the height of the font
characters.
Courier
This item lets you select the version of
Courier font to use.
Item Explanation
Values: 5 ~ 128
Values: 0.44 ~ 99.99 (0.01 unit)
Values: 4.00 ~ 999.75 (0.25 unit)
Values: Regular, Dark
Item Explanation
Print PS Error
You can select whether or not your printer
prints an error list when a PS error occurs.
•Select
On
to print PS 3 emulation errors. If
an error occurs, the job stops processing,
the error message prints, and the printer
flushes the job.
• If this menu is set to
Off
, the job is flushed
without an indication of the error.
Values: Off, On