Filter
Top Products
Using Your Printer on a Network (CLP-650N only)
8.
4
12
Press the scroll button ( or ) until you see the
desired frame type and press the
Enter
button ( ).
13
Press the
On Line/Continue
button ( ) to return to
ready mode.
Restoring the Network Configuration
You can return the network configuration to its default settings.
1
In ready mode, press the
Menu
button ( ) until you see
“Network” on the bottom line of the display.
2
Press the
Enter
button ( ) to access the menu.
3
Press the scroll button ( or ) until “Default Set”
displays on the bottom line. Press the
Enter
button ( ).
4
Press the
Enter
button ( ) to confirm the selection.
5
Reboot the network interface card.
Rebooting the Network Interface Card
If you configured the “Netware” or “Config WLAN” menu option,
the printer will not recognize your change.
In this case, you can simply reboot the network interface card
without turning your printer off and back on.
1
In ready mode, press the
Menu
button ( ) until you see
“Network” on the bottom line of the display.
2
Press the
Enter
button ( ) to access the menu.
3
Press the scroll button ( or ) until “Reset Network”
displays on the bottom line. Press the
Enter
button ( ).
4
Press the
Enter
button ( ).
The printer reboots the network interface card.