Filter
Top Products
System setup
242
3. Useful Setting Menus
Auto Continue
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
• 0 Sec: This option allows you to continue printing
when the paper size you have set is mismatched with
the paper in the tray.
• 30 Sec: If a paper mismatch occurs, an error message
will display. The machine waits for about 30 second,
then automatically clear the message and continue
printing.
• Off: If a paper mismatch occurs, the machine waits
until you insert the correct paper.
Altitude
Adjustment
Optimize print quality according to the machine’s
altitude.
Humidity
Optimizes print quality according to the humidity in the
environment.
Auto CR
Allows you to append the required carriage return to
each line feed, which is useful for Unix or DOS users.
Firmware Version Shows the product’s firmware version.
Item Description
Auto Tray Switch
Determine whether or not the machine continues
printing when it detects the paper does not match. For
example, if both tray 1 and tray 2 are filled with the same
size paper, the machine automatically prints from tray 2
after the tray 1 runs out of paper.
This option does not appear if you selected Auto
for Paper Source from printer driver.
Paper Substitution
Automatically substitutes the printer driver’s paper size
to prevent the paper mismatch between Letter and A4.
For example, if you have A4 paper in the tray but you set
the paper size to Letter in the printer driver, the machine
prints on A4 paper and vice versa.
Skip Blank Pages
The printer detects the printing data from computer
whether a page is empty or not. You can set to print or
skip the blank page.
Tray Protection
Decides to use or not use the Auto tray switch feature.
If you set tray 1 to On, for example, then tray 1 is
excluded during tray switching.
This setting works for copy or print jobs: It
doesn't affect fax jobs.
Item Description