Samsung R20plus Laptop User Manual


 
164
Q
How can I receive a FAX in Sleep mode (Standby
Mode)?
A ToreceiveaFAXwhenthecomputerisinSleep
Mode(StandbyMode),thecomputermustbe
conguredasfollows.
TheFAXprogrammustbeconguredsothatit
receivesFAXESautomaticallyreferringtotheFAX
programmanual.
Click Start > Control Panel > Hardware and
Sound.
Click on Phone and Modem Options.
In the Modemtab,selectaninstalledmodem
andclickProperties.
InthePowerManagementtaboftheModem
Propertieswindow,selecttheWake up the
computer with this device option and click the
OKbutton.
(If the Power Management tab does not
appear, select Change Settings in the
General tab.)
Whenthemodemisconguredasabove,andaFAX
arrives,thecomputerwakesupfromSleepMode
andreceivestheFAX.
Q
The <Wake On LAN> function
A1 <WakeOnLAN>isafunctionthatactivatesthe
system from Sleep mode when a signal (such as
a ping or magic packet command) arrives over the
network(wiredLAN).
Using the <Wake On LAN> Function
Click Start > Control Panel > Network and
Internet > Network and Sharing Center >
Manage Network Connections.
Right-clickontheLocalAreaConnectionand
selectProperties.
Click Congure > Power Management
tab.SelectAllow this device to bring the
computer out of standby,thenclickOK.
Restartthesystem.
If the system is activated from Sleep mode when
thereisnoreceivedsignal,usethesystemafter
disablingthe<WakeOnLAN>function.
Whenturningthepoweroffwhen<WakeOn
LAN>isdisabled,theLANLEDmaycontinueto
belit.
ConnectingawiredLANwhileusingawireless
LANmaynotactivatethe<WakeOnLAN>
function.SettheWirelessLANtoDisable to use
the<WakeOnLAN>function.
Wired Network (LAN) Related