Samsung 151MP Computer Monitor User Manual


 
English > Main > Adjusting Your Monitor > On-Screen Display > OSD Functions
User Controls
On-Screen
Display
OSD Functions
Screen Adjustment Animation Clips
Characters and icons become highlighted in blue during adjustment for each menu.
PC Screen | Video Screen | TV Screen | OSD Control
1. PC Screen
For detailed information on Screen Adjustment in the PC mode, refer to PC Screen Adjustment
Animation Clips.
Contrast
Adjust Contrast.
Brightness
Adjust Brightness.
Color Control
The tone of color can be changed from redish white to bluish white. The individual color components
are also user customizable.
1) Mode 1
: Plain white.
2) Mode 2
: Reddish white.
3) Mode 3
: Bluish white.
4) User Mode
: User customizable.
5) Reset
: Color parameters are replaced with the factory default values.
Image
This menu includes Image Lock, Image Size and Image Effect as its sub-menu.
1) Image Lock
:
Image Lock is used to fine tune and get the best image by removing noises that creates unstable
images with jitters and shimmers. If satisfactory results are not obtained using the Fine adjustment,
use the Coarse adjustment and then use Fine again.
2) Image Size
:
Allows choosing from different image sizes.
(Varies depending on the resolution or signal ratio. The Expand 1, Expand 2 and 1:1 functions work
only in PC RGB.)
3) Image Effect
:
• Coarse:
Removes noise such as vertical stripes. Coarse adjustment may move the
screen image area. You may relocate it to the center using the Horizontal
Control menu.
• Fine:
Removes noise such as horizontal stripes. If the noise persists even after Fine
tuning, repeat it after adjusting the frequency (clock speed).
• Information:
Display current display mode.
• Reset:
Image lock and position parameters are replaced with the factory default
values.
• Expand 1:
Performs full screen image expansion. (No change if the resolution is set at
maximum)
• Expand 2:
Performs image expansion while maintaining the vertical/horizontal aspect ratio of
the original video resolution. (No change if the resolution is set at maximum)
• Normal:
Displays the image as created by the signal source. (No change if the resolution is
set at maximum.)
• Zoom:
Magnifies an image up to 64 times the original size.
• Pan:
Moves the position of the magnified image on the screen either vertically or
horizontally.