Filter
Top Products
1.8
Set Up Your Machine
Printer Cable
(SF-5800P only)
Your Machine has a parallel interface port, which allows you to use it
with IBM PCs and compatible computers. You have to purchase a
Centronics parallel interface cable that supports bi-directional
communications (IEEE standard 1284). Ask your dealer for assistance if
you need help selecting the right cable.
To connect the printer to the computer, follow the steps below:
1. Make sure that both the machine and the computer are turned off.
2. Plug the cable into the connector on the back of the machine. Push
the metal clips down to fit inside the notches on the cable plug.
3. Connect the other end of the cable to the parallel interface port on
your computer. See your computer documentation if you need help.