Filter
Top Products
2.29
Automatic Dialing
2 Operation
Speed Dialing
You can store up to 80 numbers in 2-digit Speed Dial locations (01-80).
Storing a Number for Speed Dialing
1. Press and hold Speed/Status for 2 seconds.
2. Enter a 2-digit location number to which you want to store a
number, then press Enter.
If a number is already stored in the location you chose, the display
shows the number in the upper line and `ED:1 DEL:2 NXT:3Õ in the
bottom line. Press 1 to edit that number, 2 to delete that number, or 3
to keep that number and choose another location.
3. Enter the number you want to store, then press Enter.
4. To assign a name to the number, enter the desired name. For
information on how to enter names, see page 2.4.
Or
If you donÕt want to assign a name, skip this step.
5. Press Enter when the name appears correctly or without entering a
name.
6. To store more telephone numbers, repeat steps 2 through 5.
Or
To return to Standby mode, press Stop.
Sending a Fax Using a Speed Number
1. Load a document you want to send a fax.
2. Press Speed/Status, then enter a 2-digit speed dial location
number.
3. Press Start to dial the number. The number will be automatically
dialed, then the document begins to be transmitted when the remote
fax machine answers the phone.