Filter
Top Products
1.13
Set Up Your Machine
1 Getting Started
¥ Load envelopes with the flap side facing away from you. The stamp
area is on the left side. The end of the envelope with the stamp area
enters the feeder last.
¥ Load letterhead paper with the design facing you. The top edge of the
sheet with the logo should enter the printer first.
LETTERHEAD
Notes:
¥ Do not feed stamped envelopes. The stamp is shown for placement only.
¥ Never use envelopes with clasps, snaps, windows, coated linings, or self-stick
adhesives. These envelopes may severely damage the machine.
¥ Depending on the thickness of your envelopes, the multipurpose paper feeder
can hold up to 5 envelopes. If you experience envelope feeding problems, try
placing envelopes one at a time into the manual paper feeder.
4. Adjust the paper guides to the width of the print material. Slide
the guides until they lightly touch the stack of print material. Do not
bend the print material.
Paper guide
Note: If you print a job from PC, make sure that you select the correct paper
size and feed source in your application before printing.