Filter
Top Products
1.18
Set Up Your Machine
Sound Control
You can choose an alarm tone to sound when an error occurs (ALARM
SOUND) or any key is pressed (KEY SOUND).
1. Press Menu, then press System Setup on the one-touch keypad.
The display shows ÔRINGER VOLUME?.Õ
2. Press
¹
or
until you find ÔSOUND CONTROL?.Õ
3. Press Enter. The display prompts you to turn ON or OFF the alarm
sound.
4. Press 1 to turn the sound ON, or 2 to turn it OFF. You can also use
¨
or
Ã
button to choose ÔONÕ or ÔOFFÕ, then press Enter to confirm.
5. The display asks you to turn ON or OFF the key sound. Press 1 to
turn the sound ON, or 2 to turn it OFF.
6. The display shows the next setup menu. To return to Standby mode,
Press Stop.
Remote Diagnosis Protection
Remote diagnosis feature allows your machine to be checked out by
service company at a remote place through phone line.
If you do not want to use the remote diagnosis feature and want to
protect your machine from being open by an unauthorized person, you
can enable this remote diagnosis protection feature.
1. Press Menu, then press System Setup on the one-touch keypad.
The display shows ÔRINGER VOLUME?.Õ
2. Press
¹
or
until you find ÔREMOTE DIAGNOSIS
PROTECTION?Õ, then press Enter.
3. The display asks you to turn the feature ON or OFF. Press 1 to turn
it ON, or 2 to turn it OFF.
4. The display shows the next setup menu. To return to Standby mode,
Press Stop.