Filter
Top Products
3.7
Troubleshooting
3 Troubleshooting
Display Meaning Solution
NO. NOT ASSIGNED
NO PAPER
OVERHEAT
PAPER JAM 0
OPEN/CLOSE DOOR
PAPER JAM 1
OPEN/CLOSE DOOR
PAPER JAM 2
CHECK INSIDE
POLLING ERROR
WARMING UP
PLEASE WAIT
The One-Touch or Speed Dial
location you tried to use has no
number assigned to it.
Dial the number manually with the
keypad, or assign the number.
The printer part in your unit has
overheated.
Please wait until it cools down. If
you cannot solve the problem,
please call service.
Recording paper has jammed in
paper feeding area.
Clear the jam.
Recording paper has jammed inside
the unit.
The jammed paper still remains
inside the unit.
Clear the jam.
Clear the jam.
The remote fax machine you want to
poll is not ready to respond to your
poll.
Or
When setting up to poll another fax
machine, you have used an incorrect
poll code.
The remote operator should know
in advance that you are polling
and have their fax unit loaded
with the original document.
Enter the correct poll code.
The machine is warming up and is
off-line.
Wait until the machine is on-line.
The recording paper has run out. Load the recording paper.
TONER LOW
The toner is almost empty. Take out the toner cartridge
machine and gently shake it. After
printing a few pages, ÔTONER
EMPTY, REPLACE[CARTRIDGE]Õ
appears in the display, and the
printer system stops. Replace with
new one.
TONER EMPTY, RE-
PLACE [CARTRIDGE]
The toner cartidge has run out .
The machine stops.
Replace with a new toner
cartridge, and cleaning felt
simultaneously.
FUSER ERROR
ENGINE ERROR
There is a problem in the Fuser unit
There is a problem in the LSU
(Lsser Scanning Unit)
Unplug the power code and plug
it in again. If you cannot solve the
problem, please call service.
Unplug the power code and plug
it in again. If you cannot solve the
problem, please call service.