Filter
Top Products
1.20
Setting up your machine
Sound control
You can choose an alarm tone to sound when an error occurs (ALARM
SOUND) or any key is pressed (KEY SOUND).
1. Press Menu, then press System Setup on the one-touch keypad.
The display shows ‘RINGER VOLUME ?’.
2. Press
"
or
❷
until you find ‘SOUND CONTROL ?’.
3. Press Start/Enter. The display prompts you to turn ON or OFF the
alarm sound.
4. Press 1 to turn the sound ON, or 2 to turn it OFF. You can also use
➛
or
❿
button to choose ‘ON’ or ‘OFF’, then press Start/Enter to confirm.
5. The display asks you to turn ON or OFF the key sound. Press 1 to turn
the sound ON, or 2 to turn it OFF.
6. The display shows the next setup menu. To return to standby mode,
press Stop.
Remote diagnosis protection
Remote diagnosis feature allows your machine to be checked by a service
company from a remote place through the phone line.
If you do not want to use the remote diagnosis feature and want to protect
your machine from being opened by an unauthorized person, you can
enable this remote diagnosis protection feature.
1. Press Menu, then press System Setup on the one-touch keypad.
The display shows ‘RINGER VOLUME ?’.
2. Press " or ❷ until you find ‘REMOTE DIAGNOSIS PROTECTION ?’,
then press Start/Enter.
3. The display asks you to turn the feature ON or OFF. Press 1 to turn it
ON, or 2 to turn it OFF.
4. The display shows the next setup menu. To return to standby mode,
press Stop.