Sanyo PLV-Z4 Projector User Manual


 
22
Basic Operation
Zoom and Focus Adjustment
Rotate the Zoom Lever to zoom in and out.
Rotate the Focus Ring to focus the image.
Zoom Lever
Focus Ring
For some frequently used operations, using the remote control is advisable. Just pressing one of the buttons enables you to
make the operation, and no need for calling up the On-Screen Menu.
Press the FREEZE button to freeze the picture on the screen. To
cancel the Freeze function, press the FREEZE button again or
press any other button.
FREEZE button
LAMP CONTROL button
Press the LAMP CONTROL button to select a lamp mode for
changing the brightness of the screen.
Normal . . . . . Normal brightness.
Auto 1 . . . . . The brightness according to the input signal.
Auto 2 . . . . . Less bright and lower-sound than Auto 1.
Eco . . . . . . . Lower brightness reduces the lamp power
consumption.
The lamp mode is automatically switched to the Eco mode under
no signal input.
LAMP
CONTROL
button
FREEZE
button
LIGHT button
Press the LIGHT button to light up the remote control buttons. The
lights will be automatically turned off when no buttons on the
remote control are pressed for 10 seconds.
LIGHT
button
Remote Control Operation
Remote Control
IMAGE ADJ.
LIGHT
LAMP
NO
SHOW
FREEZE
MENU
RESET
OK
IMAGE
SCREEN
LAMP CONTROL
Note:
See the next page for other buttons.