Sanyo PLV-Z4 Projector User Manual


 
6
Safety Instructions
CAUTION IN CARRYING OR TRANSPORTING
THE PROJECTOR
Do not drop or bump the projector, otherwise damages or
malfunctions may result.
When carrying the projector, use a suitable carrying case.
Do not transport the projector by using a courier or transport
service in an unsuitable transport case. This may cause
damage to the projector. To transport the projector through
a courier or transport service, consult your dealer for more
information.
Do not put the projector in a case before the projector is
cooled enough.
Moving the Projector
When moving the projector, make sure that the automatic
slide shutter is closed and retract the adjustable feet to
prevent damage to the lens and cabinet.
When the projector is not in use for an extended period, put it
into a suitable case to protect a projector.
Care must be taken when handling the projector; do not drop,
bump, subject it to strong forces or put other things on the
cabinet.
20˚
20˚
Do not tilt the projector more than 20
degrees from side to side.
Do not point the projector down to
project an image.
Do not put the projector on either side
to project an image.
Install the projector properly. Improper Installation may reduce
the lamp lifetime and cause a fire hazard.
NO DOWNWARD
NO SIDEWARD
Installing the Projector in Proper Position
Openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or
covered.
CAUTION
Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.
Do not put any flammable objects or spray can near the
projector. Hot air is exhausted from the ventilation holes.
Keep the exhaust vent at least 3’ (1 m) away from any
objects.
Do not touch the peripheral part of the exhaust vent,
especially the screws and metallic part. This area will
become hot while the projector is being used.
Do not put anything on the cabinet. Objects put on the
cabinet will not only get damaged but also cause a fire
hazard by heat.
Cooling fans are provided to cool down the projector. The
fans’ running speed is changed according to the temperature
inside the projector.
Air Circulation
Air Intake Vents
Exhaust Vent
(Hot air exhaust)