Sanyo PLV-Z4 Projector User Manual


 
30
Image Adjustment
COLOR MANAGEMENT LIST
Clear the check mark if you
do not want to apply this
adjusted color data to a
projected image.
Select [Yes] to delete
the adjusted color data.
This function can be selected only when Advanced menu in the
Setting Menu (p.35) is “On”. You can adjust the following items
through this function.
Lamp iris . . . . . . . . . . . . . Select Auto, Open or Close for the
Lamp iris.
Auto black stretch . . . . . Enhance the black color in a bright
image. Select Off/ L1/L2/L3.
Contrast enhancement . . Adjust the contrast of color in a bright
image. Select Off/ L1/L2/L3.
Transient improvement . . . . Adjust the sharpness of picture
outline. Select Off/ L1/L2/L3.
Color management . . . . . Adjust color level, color phase and
gamma of the selected spot of a
projected image. Exchange the
original color with the adjusted one.
The projector can store up to eight (8)
color management data. For details,
see “COLOR MANAGEMENT”
below.
Gain R/G/B . . . . . . . . . . . Adjust red, green and blue to get the
desired contrast of color.
(From -15 to +15.)
Offset R/G/B . . . . . . . . . . Adjust red, green and blue to get the
desired brightness of color.
(From -15 to +15.)
Gamma R/G/B . . . . . . . . Adjust red, green and blue to get the
desired neutral color.
(From -5 to +5.)
Advanced menu
Press the Point 8 or OK
buttons to access the
selected item. The adjust-
ment bar will be displayed.
Select the DEL box if
you want to delete the
adjusted data. The
confirmation box will
appear.
COLOR MANAGEMENT
COLOR MANAGEMENT LIST
Select Color management in the Advanced menu and then
press the OK or Point 8 buttons. The COLOR
MANAGEMENT LIST will appear. You can store up to eight
(8) color management data in the list.
Press the OK button when selecting the following items.
ALL DEL . . . . . Delete all the data in the list.
Press the OK button and the confirmation
box will appear. Select [Yes] and press the
OK or Point
8 buttons.
COLOR M. . . . Go to COLOR SELECTION on the next
page.
EXIT . . . . . . . . Exit the Color management mode and
return to the Advanced menu. To store the
adjusted data, see “Store” in the next
page.
Press the MENU button when you want to return to the
Advanced menu.
Use the Point 7 8 buttons
to adjust the setting values
and press the OK button.
If you press the Point
d
button, the next item can
be selected.